| Subject | Text |
| sylvania srt2227 service mode | Need to know how to enter service mode or digital adjustment for this model.
Luis |
| SEND ME YOUR EMAIL ADDRESS AND I WILL SEND YOU THE ADJUSTMENT MANUAL. |
|
|
| Service Manual on TVs SAMSUNG | I welcome you!
It is very necessary Service Manual on TVs SAMSUNG of the following models:
1. SA |
| hitachi tv vertical hold problem | have a hitachi ct-7899b tv that every 10-15 min the vert hold goes for a min , no vert adjustment o |
| [quote:9191876cbf]( i think) repaired board how do I get to the adjustment screen?[/quote:9191876cbf |
| Sorry , I tried to edit my original post but I can't login . Here is what I've found out :
1 : The |
| can will help to shift a frequency | Who step of adjustment FM with 200 on 100 can will help to shift a frequency grid-switch. Device Chr |
| Inadequate e-w correction F19 chassis (Goodmans W322NS) | The S-correction capacitor had blown, now replaced and all seems fine except for the e-w correction. |
| Don't know the brand or type of the TV, but if it has a electronic convergence adjustment, you might |
| dark picture | i vave a very dark picture on my tv. there is an adjustment on the board but it is turned up all the |
| Re: Could still be corrupted | [quote:9a5723a199="jts1957"]daveyd "... It was kinda funny, before I did the reset, some of the |
| Thank you for taking time to help me....Ive tried the mute 1 8 3 using the remote but the convergenc |
| Re: sylvania srt2227 service mode | [quote="djluis"]Need to know how to enter service mode or digital adjustment for this model.
Luis[/ |
| many thanks, solve the problem. Was G2 adjustment screen.Thanks to all.... |
| Thanks for the input, I was able to get the laser focus to work, and then it crapped out on the sled |
| Why user's manual | First, your original post didn't say you had consulted the user's manual.
Second, that manual wo |
| yes a philips screw driver should do the job.some manufacturers leave holes for this adjustment some |
|
|
| Hello, you cannot fix it properly thru the service menus. Luckily I've found a way to fix the bright |
| Tape Stabilizer | Thanks!
The machine had played this way for several years - with the tape stabilzer missing. I've |
| I've had a couple of CRTs go down on Philips 32" models. The effect you get on screen is like a red |
| I couldn't find CT301 but found CT331 which is the right one according to another thread. By twistin |
| Bright | There is a black transformerwith a red wire coming out of the top and attached to the back of the CR |
| monitor prob | The flashing usually means an error code depending on how many flashes and pauses I dont know this p |
| Zenith PVY4665DT questions | Hello all,
Someone I know is selling a Zenith 50" rear projection TV, model PVY4665DT for ju |
| convergence | Have you adjusted the tubes in the back? You can make adjustments easily. In the front there are f |
| I need a service manual for a Toshiba 61HX70 Projection TV | I have a misaligned red crt and was wanting to see what the adjustment procedure is |
| Pioneer 9191 Cassette Deck | I have a Pioneer 9191 tape deck-it will not rewind or fast forward-But it records and plays just fin |
| Trouble shooting systems | [quote:36d03f5807="Anonymous"]After 46 years servicing electronics, there is one thing that never fa |
| servicecode adjustment parameter in SamsungTV model CS-5366Z | can any body give me the details of service mode parameter in the above said model i.e. under headin |
| Convergence controls | the convergence controls are: for eg. under 6 fine adjustment on the remote use P +- and VOL +- to s |